Showing posts with label Tokusatsu. Show all posts
Showing posts with label Tokusatsu. Show all posts

Saturday, May 28, 2011

Ohtsuka Kikau 1/10 Tiger Joe

Part Medicom RAH and part Mego, the Ohtsuka Kikau Hyper Hero 1/10 scale Real Action Doll Collection is an interesting anomaly in the world of Japanese toy collecting. I know very little about the line and any knowledge is based on the tiny bits of information I've culled over the years. It does not appear to be the most popular of lines for collectors, as I've yet to meet anyone outside of JohnnyBoy who actually knows what they are and owns a few. They appear a bit pricey in the aftermarket from the prices I've seen them going for on Yahoo Japan. Generally selling from 3,000 to over 100,000 ¥ depending on the character. I have to assume they had lower runs of some characters or offered them as Magazine or contest exclusives. Their licenses run the gamut of usual Japanese properties, with Kamen Rider dominating their output, Fist of the Northstar and Kinnikuman, Saint Saya and Mazinger and then an odd selection of various Toei Tokusatsu shows like Gavan and a few based on various Ultraman incarnations. But the mystery gets stranger, I've recently come across images of a terribly expensive Dynamite Gokin Darth Vader with die cast armor of all things! Wow!!

Image via Figures.com poster onetoy

Personally I have three, Kikaider, Yellow Gao Ranger and the recently acquired Tiger Joe from the Lion Maru TV series. I picked him up fairly cheap, in the 4,000 ¥ range, mint and never removed from the box.

And what a beautiful and unusual piece he is! Like Lion Maru, he's the usual anthropomorphic bipedal magical cat Samurai. As I have never had the pleasure of seeing more than the opening and closing sequences of the show, the box art dictates he's perhaps an adversary. Once opened, the box contains the base 1/10th scale body, body suit which is made from an almost terry cloth material head, cape, scarf, sword and the usual assortment of hands, including one for use with Lion Maru, if you are so lucky to own him. JohnnyBoy told me horror stories about how much difficulty he had piecing together his Ninja Arashi. or the uninitiated, these 'toys' are sort of a hybrid model kit, I have to assume born of the garage kit generation of 1980's Japan or maybe a simple cost cutting measure, so it's not unusual to have to use a knife to trim off excess plastic or glue some parts together. Tiger Joe requires a bit of trimming, the boots and a small portion just below the head.
Otherwise everything else goes together fairly easily.

The only other kit like assembly detail was the use of two faced tape (provided) to secure the chest plate to the front of the costume. Some incredible details highlight the beautifully sculpted boots and gloves. The Belt actually has a working buckle, not just Velcro. The sword is some sort of galvanized plastic with weight to give the impression of metal. No detail is spared and it's glaringly obvious that again, the Japanese just cannot be beat when it comes to making toys, in any scale. The details are so fine on this piece that it is hard to image they are even in the same scale as Mego's, appearing even smaller because they actually get the physical proportions right.

These minute details should make any fan of those terrible DC Direct 12" dolls weep and gasp, they are almost the equivalent of Hot Toys for this scale. A bold statement indeed. It appears the company no longer exists with an attempt to log onto their website redirecting me to a generic server page and all item listings on HLJ are labeled as discontinued. Based on the character output it appears the line died in the early 2000's. Research tells me they've actually been around since the 1970's with a very familiar logo, usually associated with die cast. In any case, if you've ever considered it, I can only give these pieces high marks, especially if they can be found inexpensively, but be prepared to do a little assembly work. Don't think I want a complete collection but I'd definitely live to pepper my cases with a few more pieces.



Monday, March 28, 2011

Wednesday, March 23, 2011

Real Action Hero Red and Blue Go Ranger - Medicom 1995

Name: Gorenger -1, Gorenger - 2
Scale: 1/6
Manufacturer: Medicom/Takara/Time House
Year: 1995
Materials: Plastic, Vinyl
Country of Origin: Japan
Price: $10 - $90 each
Acquired Via: Yahoo Japan


There was a time when I was determined to collect every single Medicom Real Action Hero. When this line was introduced in the 1990's there was nothing quite like it. Taking the Mego or Captain Action concept a few steps further, by providing a main body, licensed from Takara (Combat Joe), add a removable costume and accessories and securing licenses of their own from such diverse properties as the Judge Dredd film starring Sylvester Stallone to Bruce Lee to the various Tokusatsu and Anime series their target demographic grew up on.

To be fair the idea likely had it's roots in Takara's own Henshin Cyborg line from the 60's-70's, but the primitive engineering of the day made sure that these were toys for young boys where Medicom definitely had the teen to adult collector in mind.

Back in the day these figures were very high end, costing from $70-$100 US dollars if you could find them, these were after all the days before eBay and the Internet were commonplace for rabid collectors. We used to have to rely on exotic dealers from California at local twice annual comic book conventions to get our Japanese toy fixes back then. Nowadays, with the vast improvements Medicom has made to their current additions to the RAH line, not to mention Hot Toys who pretty much ruined it for anyone by setting the bar so high, most even high end 1/6 toys look like crude customs, these original RAH's can be found for cheap if you are patient and spend a disproportionate amount of your free time trolling the thousands of Yahoo Japan listings all hours of the night.

These prices however do not come without their negatives, unfortunately companies like Medicom and Marmit were innovators, setting new prescient with each release and no companies before them had attempted this level of faithfulness to the source with the available materials. As a result, you often get tacky, sticky or wost case, completely disintegrated jump suits. JohnnyBoy once had a Marmit Spectreman suit completely fused with the plastic bag it came in...
For either collector fetish reasons or the fact that these products were so niche many remained unsold, it's very common to find most specimens have never been removed from the box and often they or at least parts of their costumes are stuck to the inside of the box. This was the case with bot Rangers, but only the capes were affected, the jump suits are made from some sort of material and coated in paint,
much like a silk screen.

I'm not going to get into the history of Go Ranger or Gorenger as it's spelled on the box, there are plenty of other sites that could do a much better job than me. Medicom actually made all five Rangers but I've only been lucky enough to acquire the Red and Blue so far and I have to think that the Green, Yellow and Pink are pretty rare, I never come across them in all of the exhaustive searches I've done, and when you do, it's a set and it's in the 25,000 ¥ range. These figures are great, a bit floppy by today's standards, both JohnnyBoy and I have the Red Ranger and his is considerably tighter jointed than mine. Both come in the standard Medicom RAH Black box of the time with weapons, Blue with a bow and red with a laser pistol and some sort of staff with a...thing on the end...forgive me, I've never seen an episode of the show. They both come with a pair of alternate flesh colored hands as well as a pair of dynamic gloved hands with the usual fists/open hand and Blue with a hand that can hold his bow. The costumes are both some sort of synthetic fabric, not prone to the same problems as the capes and are very nice, tight fitting with no bunching at the boot or glove areas. The both come with the same belt with retractable jets, that are just too cool. Red also comes with a holster that attaches to his belt for his pistol. No limited edition pins with the ones I've received, not even sure if Medicom was still doing that promo by this time anyway.

So if you are a Tokusatsu fan, collect 1/6 figures or just like cool toys, these are a steal and as I said can be found for peanuts if you look long enough but are definitely worth it if you pay a bit more.

Monday, March 21, 2011

1/6 GR-2 - Unknown Manufacturer, Unknown Year

Name: GR-2
Scale: 1/6
Manufacturer: ?
Year: ?
Materials: Plastic, Vinyl, Rubber
Country of Origin: Japan
Price: $50 (approx)
Acquired Via: Online Toy Forum

Been wanting to get my hands on this piece for a long time. Having grown up watching reruns of Johnny Sokko and Ultraman I've always had a special place in my heart for Giant Robo. Not quite as popular as Ultraman or Kamen Rider, the toys didn't really find their way to North America in the same numbers making a Giant Robo toy a bit of a grail for many years as far as my personal collection was concerned. Sometime in the 90's, perhaps as the critically acclaimed re-envisioned Anime based on the original works of Mitsuteru Yokoyama was nearing release, the floodgates opened and companies like Marmit and Medicom were offering products based on the 1967 Live Action series, we not only got Giant Robo, but many of the insane giant monsters and robotic doppelgangers became alot easier to find in local comic shops via Diamond and more commonly on ebay.

GR-2 has always been a personal favourite just because of his awesome simple and sleek black design, not to mention the unususal head piece that doubles as a weapon. I've managed to collect a few pieces over the years and until recently this one has eluded me. Thanks to an incredible online toy community forum, I not only scored GR-2 but ol' GR himself. These kits always scared me a bit, especially when I recently tracked down a pre build Bed Baron that was just a poorly constructed floppy mess. These early 1/6 toys from Marmit and even Medicom often were a hybrid of garage kit and toy action figure often requiring the user to cut or glue some of the pieces together to get a finished product.

I hesitantly sat down this past Saturday with a big cup O' Joe, a few exacto knives and a file to tackle GR-2 and you know what, though intimidating with all that cutting, it was not all that bad.


I have to admit, while I have built my share of model kits, it's been close to 10 years since I've put one together despite owning close to 50 unbuilt kits at one point, this was more than a little intimidating. This was $50 and I desperately did not want to make one mistake. Let's get one thing clear, if you plan to buy this kit, you will not cut every piece perfectly, so live with it, relax and do your best. One thing that didn't dawn on me until I finished was heating the vinyl would have made cutting a whole lot easier. Anyway, above are the pieces, a rubber frame that cover the base body and provides the accordion like joints for the knees and elbows, not to mention some nice color contrast and the hard vinyl black outer body. The base body is just strange, a weird wire frame with a small head that provides some limited movement in the arms and legs but a Revoltech this is not, you get two poses from the completed model.

This definitely took about three hours to complete in total, I was taking my time to be sure not to make a bad cut, and as I said earlier, I did NOT heat the vinyl so some of the pieces required alot of work. The instructions while simple and not translated were ample and I only made one mistake cutting the trim off of the hands, not leaving enough slack, but it still looks fine. I have to say, whomever put the aforementioned Red Baron together was just not a skilled modeler or they tweaked the kits as they released them because the end result is a nice, solid toy that looks great despite the limited poseability. The base head acts as a ball joint so there is a nice amount of range for the head piece. In all I'd say, if you are interested in the kit, if you have even rudimentary skills do not be afraid, it's much easier than it looks, if you have absolutely no modeling skills at all, maybe ask a friend for help.

The mystery of this figure is the Manufacturer and the year it was released. Also how many kits make up this line, I've seen Red Baron, Mach Baron, GR and GR-2 and even recently found a Combattler V version on Yahoo Japan doing random searches, so who knows, this appears to be a line even more neglected than the Marmit Super Action Heroes line which we plan to cover here in the future. So if you have any info, please comment below.

Left to Right: Vinyl Paradise, Marmit 1996; Unknown, Unknown; Kaiyodo Sci Fi Revoltech, 2010; Medicom Toy Miracle Action Hero, 2000